Veröffentlichungen

h-Index 14

Journal

2023Achim Frick, Carlos Ernst, Iman Taha. Einfluss einer praxisüblichen Härtetoleranz auf die thermo-mechanischen und schwingungsisolierenden Eigenschaften eines Acrylnitril-Butadien-Elastomers. Materials Science and Engineering Technology 54 (2023) 1184-12

Link
2023Patricia Erhard, Iman Taha, Daniel Günther. Resin Infiltration of 3D-Printed Sand Tools. Manufacturing Processes and Systems 16 (2023) 5549

Link
2023Sara Nester, Dieter Meinhard, Jochen Schanz, Markus Rettenberger, Iman Taha, Harald Riegel, Volker Knoblauch. Joining of Aluminum and CFRP via Laser Powder Bed Fusion: Influence of Experimental Set-Up and Laser Processing on Microstructure and Mechanical Properties. Polymers 15 (2023) 3839

Link
2022Moritz Warnck, Maximilian Binder, Georg Edelmann, Marion Früchtl, Iman Taha. Condition monitoring of multi-material lightweight components through a sensitive outer skin using Fiber-Bragg-Grating sensors. Procedia CIRP 110 (2022) 313-318

2022Nira Zoesmar, Daryl Fuchs, Iman Taha. Treatment of additively manufactured AlSi10Mg surfaces for improved bonding with fiber reinforced composites for sandwich applications. Journal of Sandwich Structures and Materials (2022) 1152-1168)

2022Zoesmar N., Birkle L., Fuchs D., Warnck M., Wendel M., Kuhn M., Taha I., Carbon and silane-based coatings for improved bonding in Hybrid metal-composite applications. Chemie Ingenieur Technik 94 (2022) 1030-1039

2021Daniel Günther, Patricia Erhard, Simon Schwab, Iman Taha. 3D printed sand tools for thermoforming applications of carbon fiber reinforced composites – A perspective, Materials 14 (2021) 4639

2021Manual Arrillaga, Iman Taha. A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration. Additive Manufacturing 37 (2021) 101743

2020Sebastian Huayamares, Dominik Grund, Iman Taha. Comparison between 3-point bending and torsion methods for determining the viscoelastic properties of fiber-reinforced epoxy. Polymer Testing 85 (2020) 106428

2019Dominik Grund, Manuel Orlishausen, Iman Taha, Determination of fiber volume fraction of carbon fiber-reinforced polymer using thermogravimetric methods, Polymer Testing 75 (2019) 358-366

2019Taha I., ElKafafy M. Samir, El-Mously H., Potential of utilizing tomato stalk as raw material for particleboards, Ain Shams Engineering Journal 9 (2018) 1457 – 1464

2018Michael Dawoud, Iman Taha, Samy J. Ebeid, Strain sensing behaviour of 3D printed carbon black filled ABS, Journal of Manufacturing Processes 35 (2018) 337-342

2018Taha I., ElKafafy M. Samir, El-Mously H., Potential of utilizing tomato stalk as raw material for particleboards, Ain Shams Engineering Journal 9 (2018) 1457 – 1464

2017Alexander Streitferdt, Natalie Rudolph, Iman Taha, Co-Curing of CFRP-Steel Hybrid Joints Using the Vacuum Assisted Resin Infusion Process, Applied Composite Materials 24 (2017) 1137-1149

2017M. A. Agwa, I. Taha, M. Megahed, Experimental and analytical investigation of water diffusion process in nano-carbon/alumina/silica filled epoxy nanocomposites, International Journal of Mechanics and Materials in Design 13 (2017) 607-615ical investigation of water diffusion process in nano-carbon/alumina/silica filled epoxy nanocomposites

2017M.A. Saleh, I. Taha, S.J. Ebeid, Correlation of injection moulding parameters with mechanical and morphological aspects of natural fibre reinforced thermoplastics, Materialwissenschaft und Werkstofftechnik 49 (2019) 193-205

2016Ahmed W. Abdel-Ghany, Iman Taha, Samy J. Ebeid, Failure Prediction of Fiber Reinforced Polymer Pipes using FEA, International Journal of Engineering and Technical Research, 4 (2016) 115-120

2016Bakeer B., Taha I., El-Mously H., Mechanical behaviour of sorghum stalk rind reinforced maleic anhydride grafted polyethylene under different environmental conditions, Polymers and Polymer Composites, 24 (2016) 35-44

2016Michael Dawoud, Iman Taha, Samy J. Ebeid, Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques, Journal of Manufacturing Processes 21 (2016) 39-45

2016Mohamed Akram, Iman Taha, Mohamed Ghobashy, In-Situ Pyrolysis: A Novel Technique for the Dispersion of Carbon Particles in Thermoplastics, Journal of Reinforced Plastics and Composites 36 (2016) 414-421

2016Mohamed Akram, Iman Taha, Mohamed Ghobashy, Low Temperature Pyrolysis of Carboxymethylcellulose, Cellulose, 23 (2016) 1713-1724

2016Mohamed Akram, Iman Taha, Mohamed Ghobashy, Potential of Carbon Particle Reinforced Polypropylene Formed In-Situ through the Pyrolysis of Carboxymethylcellulose, Composites Communications 1 (2016) 6-14

2015Chaloupka, A., Bezerra, R., Madaksira, V., Taha, I., Rudolph, N.M., Detection and modelling of thermal and rheological transitions of a 2-step-curing thermoset using dielectric and standard measuring techniques. ICCM International Conferences on Composite Materials, 2015, 2015-July

2015Chaloupka Alexander, Wedel André, Taha Iman, Rudolph Natalie, Drechsler Klaus, Phase change detection in neat and fiber reinforced polyamide 6 using dielectric analysis, Materials Science Forum, 825-826 (2015) 944-951

2015Gerges S. Youssef, Iman Taha, Lamia A. Shihata, Wagdy E. Abdel-ghany, Samy J. Ebeid, Improved energy efficiency in troughed belt conveyors: Selected factors and effects, International Journal of Engineering and Technical Research 3 (2015) 174-180

2015Khaled Mustafa Elerian, Iman Taha, Hamed Elmously, Investigation on the use of cellulose-based nano fibers for polymer composites reinforcement, Al-Azhar Journal 2015

2015Michael Dawoud, Iman Taha, Samy J. Ebeid, Effect of processing parameters and graphite content on the tribological behaviour of 3D printed acrylonitrile butadiene styrene, Materials Science and Engineering, Technology 46 (2015) 1185-1196

2014Mohamed Abd ElHameed, Iman Taha, Hamed El-Mously, Effect of water content on solid biofuel pellets produced from rice straw, Al-Azhar Journal 2014

2014Mohamed M.W.N., Mashaly I.A., Mohamed O.N., El-Henawy S.I., Galal O., Taha I., Nassar K. Safwat A.M.E. Light redirecting system using sine-wave based panels for dense urban areas. Proceedings of SPIE - The International Society for Optical Engineering, 2014, 9191, 91910N

2014Sally I. El-Henawy, Mohamed W. N. Mohamed, Islam A. Mashaly, Osama N. Mohamed, Ola Galal, Iman Taha, Khaled Nassar, Amr M. E. Safwat, Illumination of dense urban areas by light redirecting panels, Optics Express 22 (2014) A895-A907

2013Abdin Y., Taha I., El-Sabbagh A., Ebeid S., Description of Draping Behaviour of Woven Fabrics over Single Curvatures by Image Processing and Simulation Techniques, Composites Part B: Engineering 45 (2013) 792-799

2013Ahmed El-Sabbagh, Iman Taha, Characterization of the Draping Behavior of Jute Woven Fabrics for Applications of Natural-Fiber/Epoxy Composites, Journal of Applied Polymer Science 130 (2013) 1453-1465

2013Bakeer B., Taha I., El-Mously H., Shehata S.A., On the characterisation of structure and properties of sorghum stalks, Ain Shams Engineering Journal 4 (2013) 265-271

2013M.M. El Sheikh, A. M. Rabei, A.I. Hussein, I. M. Taha, Novel Techniques for Production of Nano Emulsion Polymers for Textile Applications, Nature and Science 11 (2013) 30-35

2013Taha I., Abdin Y., Ebeid S., Comparison of picture frame and bias-extension tests for the characterization of shear behaviour in natural fibre woven fabrics, Fibers and Polymers 14 (2013) 338-344

2012I. Taha, Investigation of flax fibre reinforced epoxy friction composites, Materials Science and Engineering Technology 43 (2012) 1-8

2012Taha I., Abdin Y., Ebeid S., Analysis of the Draping Behaviour of Multi-Layer Textiles using Digital Image Processing, Polymers and Polymer Composites,20 (2012) 837-844

2012Taha I., Abdin Y., Ebeid S., Prediction of Draping Behaviour of Woven Fabrics over Double-Curvature Moulds using Finite Element Techniques, International Journal on Materials and Mechanic Engineering 1 (2012) 25-31

2011El-Sabbagh A., Taha I., Taha R., Prediction of the Modulus of Elasticity of Short Fibre Reinforced Polymer Composites by Finite Element Modelling, Journal of Polymers and Polymer Composites 19 (2011) 733-742

2011Taha I., Abdin Y., Modeling of Strength and Stiffness of Short Randomly Oriented Glass-Fiber Polypropylene Composites, Journal of Composite Materials 45 (2011) 1805-1821

2010Kamal A., Taha I., Vibration Damping Behavior of Fiber Reinforced Composites: A Review, Key Engineering Materials 425 (2010) 179-194

2010Taha I., Ziegmann G., Potential of Sisal Reinforced Biodegradable Polylactic acid and Polyvinyl Alcohol Composites, Key Engineering Materials 425 (2010) 167-178

2008Taha I., El-Sabbagh A., Ziegmann G., Modelling of Strength and Stiffness behaviour of Natural Fibre Reinforced Polypropylene Composites, Polymers and Polymer Composites 16 (2008) 283-290

2007Taha I., Steuernagel L., Ziegmann G., Optimization of the alkali treatment process of date palm fibres for polymeric composites, Composite Interfaces 14 (2007) 669-684

2006Taha I., Steuernagel L., Ziegmann G., Chemical Modification of Date Palm Mesh Fibres for Reinforcement of Polymeric Materials. Part I: Examination of Different Cleaning Methods, Polymers and Polymer Composites 14 (2006) 767-778

2006Taha I., Ziegmann G., A Comparison of Mechanical Properties of Natural Fibre Filled Biodegradable and Polyolefin Polymers, Journal of Composite Materials 40 (2006) 1933-1946

2005Taha, I; Abdellatif, M.A.; Dietz, P.; Infiltration and Coating of Rapid Prototyping Parts, Journal of Advanced Materials 7 (2005) 91-96

Prof. Dr.-Ing. Iman Taha

+49 7361 576-2558
iman.taha@hs-aalen.de
269
Sprechzeiten
nach Absprache